The Correct Way to Install Grip Tape on Your Stunt Scooter

The Correct Way to Install Grip Tape on Your Stunt Scooter

Introduction

If you own a stunt scooter, you know how essential grip is for executing tricks and manoeuvres with precision. Grip tape plays a crucial role in providing traction and control while riding. In this article, we will guide you through the process of installing grip tape on your stunt scooter to enhance your riding experience. Follow these steps carefully to achieve a professional and durable grip tape installation.

CORE Scooter Grip Tape

What You'll Need

Before we begin, gather the necessary materials to install grip tape on your stunt scooter:

  • A new grip tape sheet
  • Razor blade or box cutter
  • A flathead screwdriver
  • Rubbing alcohol or grip tape cleaner
  • Clean cloth or rag
  • Hairdryer or heat gun (optional)
  • Patience and attention to detail!

Preparing the Scooter

Before applying the new grip tape, ensure your stunt scooter is clean and free from any debris or dust. Lay the scooter on a flat surface with the deck facing upward, and remove any existing accessories such as stickers or decals.

Removing Old Grip Tape

If there is old grip tape on your scooter, carefully use the flathead screwdriver to lift the edges. Slowly peel off the grip tape, ensuring not to damage the deck's surface. Additionally, using a hairdryer or heat gun on low power can help loosen the grip tape adhesive, making the job easier overall.

Cleaning the Deck

Once the old grip tape is removed, use rubbing alcohol or grip tape cleaner to thoroughly clean the deck. This step is crucial as it ensures proper adhesion of the new grip tape.

CORE Grip Tape on Stunt Scooter Deck

Applying the Grip Tape

Carefully unroll the new grip tape sheet over the deck, aligning it with the edges. Make sure the tape covers the entire surface without leaving any gaps. Smooth it down with your hands to prevent bubbles from forming.

Smoothing Out the Grip Tape

To achieve a seamless and bubble-free grip tape installation, use a hairdryer or heat gun on low heat. Gently heat the grip tape and press it down with your hands or a stack of books to eliminate any air pockets.

Trimming the Excess Tape

Once the grip tape is securely applied, use the razor blade or box cutter to trim the excess tape along the edges of the scooter deck. Take your time during this step to achieve clean and precise cuts.

Final Touches

Run your hand over the grip tape to ensure it is firmly attached and smooth. Check for any loose edges or bubbles and fix them as needed. Your stunt scooter is now equipped with fresh grip tape!

CORE SL Deck With CORE Grip Tape

Tips for Maintenance

  • Regularly inspect your grip tape for signs of wear and tear. Replace it when necessary to maintain optimal performance.
  • Keep your stunt scooter stored in a cool and dry place to prolong the grip tape's lifespan.
  • Avoid exposing the grip tape to moisture and dirt or extreme temperatures as this can affect its adhesive properties.

Conclusion

Installing grip tape on your stunt scooter is a simple yet essential process that significantly improves your riding experience. By following the steps outlined in this article, you can achieve a professional grip tape installation that enhances traction and control while performing tricks and stunts.

FAQs

  1. Is grip tape necessary for stunt scooters? Yes, grip tape is crucial for stunt scooters as it provides traction and control, ensuring a safer and more enjoyable ride.

  2. Can I reuse old grip tape? While it is possible, we recommend using a new grip tape for the best performance and adhesion.

  3. How often should I replace grip tape? The frequency of grip tape replacement depends on how frequently you ride your scooter and its condition. Check it regularly and replace when it shows signs of wear.

  4. Can I apply grip tape on a wet scooter deck? No, it's essential to apply grip tape on a dry and clean deck for proper adhesion.

  5. Can I use soap and water to clean the deck before applying grip tape? No, using soap and water can leave a residue that affects the grip tape's adhesion. Stick to using rubbing alcohol or grip tape cleaner for better results.

With the installation of new grip tape, you're all set to take your stunt scooter to the next level! Enjoy a smooth and controlled ride as you perform jaw-dropping tricks and stunts with confidence. Remember to inspect and maintain your grip tape regularly to ensure peak performance and safety. Happy riding!


Bitte beachten Sie, dass Kommentare vor der Veröffentlichung freigegeben werden müssen

Diese Website ist durch reCAPTCHA geschützt und es gelten die allgemeinen Geschäftsbedingungen und Datenschutzbestimmungen von Google.